What is the Front & Rear maintenance Led Display?

1.Rear Maintenance

Maintenance is performed from the back of the LED display cabinet, the rear of the LED display cabinet have door-like openings, has a door that opens using a key, the internal structure of the layout can be seen after opening the led cabinet.

system with front screws

This system is the most common and we find it in the vast majority of both indoor and outdoor screens.

Rear maintenance advantages

The price is slightly lower, the inspection and maintenance are convenient and efficient. It is not suitable for inlaid or wall mounted installations because if any failure occurs as it cannot be repaired from the back.
For those large LED displays installed on the exterior walls of buildings, maintenance channels must be designed so that maintenance personnel can perform maintenance and repairs from the back of the screen.

maintenance channels

Rear maintenance applicable scenarios

Building roofs, road pillars, and large-screen display screens are all available and are mostly used outdoors.

2.Front Maintenance

Maintenance and inspection are carried out from the front of the Led cabinet, In installations where the Led screen is placed on a wall or facade, the Led screens must have a frontal access system, since once installed, it is not possible to access the internal part of the screen from behind. There are three front maintenance designs:

System with front screws
In this case, the modules and led plates are attached to the cabinets through screws attached to the front.
This system is very safe, reliable and perfect for outdoor installations, although it is somewhat more laborious at the time of installation.

System with a “lock” mechanism
In this case, the LED modules are connected to the structural LED cabinets by means of a closing and opening system similar to a basic lock. From the front we have openings where we insert a simple key and turn to release the LED module.

“lock” mechanism

Magnetic system
This new system is the one that is currently being used more for front access led screens. It does not need to disassemble the wire, supports rapid maintenance work, and disassembly is simpler and more convenient. To remove it from the front of the screen, you will only need to use a suction cup tool that will allow you to remove the magnet led module from the front of the screen.

Front maintenance advantages

The LED screen cabinet can be made lighter and thinner, saving space, light, and beauty, and the disassembly of the LED module is also more convenient and efficient.

LED displays installed indoors usually adopt wall-mounted structure, so the space is extremely precious, so there will not be too many places as maintenance channels. The front maintenance can greatly reduce the overall thickness of the LED display structure, not only good Integrating with the surrounding built environment; the effect is guaranteed while saving space.

Front maintenance applicable scenarios

Conference display, security monitoring display, control and command center display, indoor small-pitch display, etc.

Conclusion:

In summary, for different application environments and practical needs, flexible use of front access and rear access is needed to better and faster solve led screen failure problems. Of course, technical support is also needed. Incompatibility and mismatch in the operation process should be avoided during the maintenance process.